Sfp+ Direct Attach Cables For Ex Series Switches - Juniper EX6210 Complete Hardware Manual

Table 38: Optical Interface Support for EX6200-48F Line cards (continued)
Ethernet Standard Specification
100BASE-BX-D Model Number
Rate
Connector Type
Fiber Count
Transmitter Wavelength
Receiver Wavelength
Minimum Launch Power
Maximum Launch Power
Minimum Receiver Sensitivity
Maximum Input Power
Fiber Type
Core/Cladding Size
Modal Bandwidth
Distance
DOM Support
Software Required
Related
Documentation

SFP+ Direct Attach Cables for EX Series Switches

Copyright © 2014, Juniper Networks, Inc.
Switch Fabric and Routing Engine (SRE) Module in an EX6200 Switch on page 26
Installing a Transceiver in an EX Series Switch on page 164
Removing a Transceiver from an EX Series Switch on page 223
Small form-factor pluggable plus transceiver (SFP+) direct attach copper cables, also
known as Twinax cables, are suitable for in-rack connections between servers and
switches. They are suitable for short distances of up to 23 ft (7 m), making them ideal
for highly cost-effective networking connectivity within a rack and between adjacent
racks.
Value
EX-SFP-FE20KT15R13
100 Mbps
LC
Single
1550 nm
1310 nm
–14 dBm
–8 dBm
–45 dBm
–8 dBm
SMF
9/125 µm
–
20 km (12.4 miles)
Not available
Junos OS for EX Series switches, Release 13.2X50-D10 or later
Chapter 3: Component Specifications
79