Juniper EX6210 Complete Hardware Manual page 132

Complete Hardware Guide for EX6210 Ethernet Switches
Table 50: AC Power Cord Specifications for an EX6200 Switch (continued)
Country/Region
Taiwan
United Kingdom
Related
Documentation
112
Electrical
Specifications Plug Standards
250 VAC, 16 A, 50 Hz NEMA L6–20 Type NEMA
Locking
250 VAC, 13 A, 50 Hz BS 1363/A Type BS89/13
CAUTION: AC power cords for EX6200 switches are intended for use with
this switch only and not for any other use.
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another
product.
WARNING: Power cords must not block access to switch components. We
recommend that you route all AC power cord cables through the optional
power cord tray provided with the switch.
CAUTION: The switch is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal
provided on the chassis in addition to the grounding pin of the power supply
cord. This separate protective earth terminal must be permanently connected
to earth ground. See
page 171.
AC Power Supplies in an EX6200 Switch on page 38
AC Power Electrical Safety Guidelines on page 290
AC Power Disconnection Warning on page 292
General Electrical Safety Guidelines and Warnings on page 287
Juniper Model Number
CBL-EX-PWR-C19-TW
CBL-EX-PWR-C19-UK
"Connecting Earth Ground to an EX Series Switch" on
Copyright © 2014, Juniper Networks, Inc.
Graphic