Juniper EX6210 Complete Hardware Manual page 153

Related
Documentation
Installing Adjustable Mounting Brackets in a Rack or Cabinet for an EX6200 Switch
Copyright © 2014, Juniper Networks, Inc.
NOTE: You must provide mounting screws that are appropriate for your rack
or cabinet to front-mount the chassis on a rack or a cabinet.
The EX6200-48F line cards are not part of the shipment; you must order
them separately.
For two-post rack installation, you need either 24 or 28 screws: 24 screws to
attach the front-mounting bracket ears that come installed on the chassis
to the front of the rack and 4 screws if you install the optional power cord
tray.
For four-post rack installation, you need either 40 or 44 screws: 24 screws
to attach the front-mounting bracket earsthat come installed on the chassis
to the front of the rack, 16 screws to attach the adjustable mounting brackets
to the rack, and 4 screws if you install the optional power cord tray.
Unpacking an EX6200 Switch on page 128
NOTE: The adjustable mounting brackets are optional for four-post rack and
cabinet installations of EX6200 switches.
The adjustable mounting brackets do not ship with the EX6200 switches. You can
purchase them separately.
To mount the switch on a four-post rack or cabinet, you can install the optional adjustable
mounting brackets in the rack or cabinet. (The remainder of this topic uses "rack" to mean
"rack or cabinet.") The four-piece set of adjustable mounting brackets support the EX6200
chassis in a four-post rack.
NOTE: The adjustable mounting brackets are not for installation in two-post
racks.
The four adjustable mounting bracket pieces are:
1 left front adjustable mounting bracket. The bracket is labeled "LEFT FRONT" on the
side of the bracket that faces the interior of the rack, near the holes for attaching the
bracket to the rack.
1 right front adjustable mounting bracket. The bracket is labeled "RIGHT FRONT" on
the side of the bracket that faces the interior of the rack, near the holes for attaching
the bracket to the rack.
2 rear adjustable mounting brackets. These brackets are labeled "REAR" on the side
of the bracket that faces the interior of the rack, near the holes for attaching the bracket
Chapter 8: Installing the Switch
133