Cable Requirements; Chapter 6 Cable Requirements; Cables Connecting The Ex6200 Switch To Management Devices; Table 46: Cable Specifications For Switch-To-Management-Device - Juniper EX6210 Complete Hardware Manual

CHAPTER 6

Cable Requirements

Cables Connecting the EX6200 Switch to Management Devices

Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
Cables Connecting the EX6200 Switch to Management Devices on page 103
Understanding EX Series Switches Fiber-Optic Cable Signal Loss, Attenuation, and
Dispersion on page 104
Table 46 on page 103 lists the specifications for the cables that connect the Switch Fabric
and Routing Engine (SRE) module to a management device.

Table 46: Cable Specifications for Switch-to-Management-Device

Connections

Port on SRE
Module or RE Cable
Module Specification
Console (CON) RS-232 (EIA-232)
port (9600 baud) serial cable
Management Category 5 cable
(MGMT) Ethernet or equivalent
port suitable for
(10/100/1000) 1000Base-T
operation
Connecting an EX Series Switch to a Management Console on page 186
Connecting an EX Series Switch to a Network for Out-of-Band Management on page 188
Cable/Wire Maximum
Supplied Length
One 6-foot 6 feet
(1.83-meter) length (1.83 meters)
with RJ-45/DB-9
connectors
One 15-foot 328 feet
(4.57-meter) length (100 meters)
with RJ-45
connectors
Switch
Receptacle
RJ-45
RJ-45
autosensing
103