Switch Fabric And Routing Engine Modules; Figure 2: Ex6210 Switch Rear; Ex6210 Switch Overview - Juniper EX6210 Complete Hardware Manual

Switch Fabric and Routing Engine Modules

Copyright © 2014, Juniper Networks, Inc.

Figure 2: EX6210 Switch Rear

Fan tray
Earthing
terminal
ESD point
The EX6210 switch can have up to two chassis-level LCD panels, one on each Switch
Fabric and Routing Engine (SRE) module. The LCD panel on the master SRE module
displays Routing Engine and chassis components' alarm information for rapid problem
identification. This LCD panel provides a user-friendly interface for performing initial
switch configuration, rolling back a configuration, or restoring the switch to its default
settings. See "LCD Panel in an EX6200 Switch" on page
The EX6210 chassis backplane distributes the data, control, and management signals
to various system components as well as distributes power throughout the system.
See "Chassis Physical Specifications of an EX6210 Switch" on page
Switching functionality, system management, and system control functions of an EX6210
switch are performed by a Switch Fabric and Routing Engine (SRE) module. See
Fabric and Routing Engine (SRE) Module in an EX6200 Switch" on page
module contains a Routing Engine and switch fabric. The SRE modules are
field-replaceable units (FRUs). A nonredundant EX6210 switch configuration has one
SRE module. A redundant configuration EX6210 switch has two SRE modules installed.
See "EX6210 Switch Configurations" on page
Chapter 1: EX6210 Switch Overview
19.
9.
7.
"Switch
26. An SRE
5