Removing Switch Components; Removing An Ac Power Supply From An Ex6200 Switch - Juniper EX6210 Complete Hardware Manual

CHAPTER 13

Removing Switch Components

Removing an AC Power Supply from an EX6200 Switch

Copyright © 2014, Juniper Networks, Inc.
Removing an AC Power Supply from an EX6200 Switch on page 209
Removing a DC Power Supply from an EX6200 Switch on page 211
Removing a Fan Tray from an EX6210 Switch on page 213
Taking the SRE Module Offline in an EX6200 Switch on page 215
Removing an SRE Module from an EX6200 Switch on page 217
Removing a Line Card from an EX6200 Switch on page 219
Disconnecting a Fiber-Optic Cable from an EX Series Switch on page 222
Removing a Transceiver from an EX Series Switch on page 223
Removing the Air Filter from an EX6210 Switch on page 226
Removing the Power Cord Tray from a Rack or Cabinet for an EX6200 Switch on page 227
The AC power supply in an EX6200 switch is a hot-removable and hot-insertable
field-replaceable unit (FRU). You remove AC power supplies from the front of the chassis.
CAUTION: Before you remove a power supply, ensure that you have power
supplies in the chassis sufficient to power the switch. See
Requirements for an EX6210 Switch" on page
Before you remove an AC power supply from the switch:
Ensure you understand how to prevent electrostatic discharge (ESD) damage. See
"Prevention of Electrostatic Discharge Damage" on page
Ensure that you have the following parts and tools available to remove an AC power
supply from an EX6200 switch chassis:
ESD grounding strap
Phillips (+) screwdriver, number 2
Replacement power supply or the appropriate cover panel for the power supply slot
"Calculating Power
113.
288.
209