Juniper EX6210 Complete Hardware Manual page 248

Complete Hardware Guide for EX6210 Ethernet Switches
Related
Documentation
228
Ensure that you have the following parts and tools available to remove the power cord
tray:
A Phillips (+) screwdriver, number 1, 2, or 3, depending on the size of your rack mounting
screws
To remove the power cord tray:
Use the appropriate Phillips (+) screwdriver to remove the four mounting screws that
1.
hold the power cord tray in the rack.
Remove the power cord tray and store it in the original shipping box for later use.
2.
Installing the Power Cord Tray in a Rack or Cabinet for an EX6200 Switch on page 136
Copyright © 2014, Juniper Networks, Inc.