Complete Hardware Guide for EX6210 Ethernet Switches
Line Card Components
Related
Documentation
48-Port PoE+ Line Card in an EX6200 Switch
Line Card Models
32
Table 18: 48-port RJ-45 Line Card Models
Model
Description
EX6200-48T
48-port RJ-45 line card
The 48-port RJ-45 line card (see
Forty-eight 10/100/1000 Gigabit Ethernet RJ-45 ports
Line Card LEDs—Two status LEDs labeled
the online and status information for the line card. See
Switch" on page
34.
Network port LEDs—Two LEDs per network port that indicate the link/activity and
status of each port. See
Installing a Line Card in an EX6200 Switch on page 160
Handling and Storing Line Cards in EX6200 and EX8200 Switches on page 231
The line cards in EX6200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. See
an EX6210 Switch" on page
You can remove and replace them without powering off the switch or disrupting switch
functions. See
Figure 13 on page
Figure 13: 48-port PoE+ Line Card
Captive
screw
Ejector
lever
This topic describes:
Line Card Models on page 32
Line Card Components on page 33
Table 19 on page 33
shows the model number, description of the line card model, and
the Junos OS release in which the model was released.
Figure 12 on page
31) has:
and
ON
"Network Port LEDs in an EX6200 Switch" on page
12. The line cards are hot-insertable and hot-removable:
32.
RJ-45 ports
Line card
LEDs
Junos OS Release Required
11.3R2 or later
on the faceplate that indicate
ST
"Line Card LEDs in an EX6200
36.
"Slot Numbering for
Copyright © 2014, Juniper Networks, Inc.