Ac Power Supply Leds In An Ex6200 Switch - Juniper EX6210 Complete Hardware Manual

Table 28: N+N Power Redundancy Configurations for Different EX6210 Switch Configurations
Using 2500 W AC and 5000 W AC Power Supplies (continued)
Switch Input
Configuration Voltage
Chassis with High-voltage
eight PoE+ line
line cards
Low-voltage
line
Related
Documentation

AC Power Supply LEDs in an EX6200 Switch

Copyright © 2014, Juniper Networks, Inc.
2500 W AC Power Supply
Minimum
Ports Number
Enabled of Power
for PoE+ Supplies
(802.3 at) (N)
0 1
91 2
384 Not
supported
0 2
8 2
384 Not
supported
AC Power Supply LEDs in an EX6200 Switch on page 47
Installing an AC Power Supply in an EX6200 Switch on page 150
Removing an AC Power Supply from an EX6200 Switch on page 209
Each AC power supply has LEDs on its faceplate that display information about the status
of the power supply.
Figure 24 on page 48 shows the LEDs on a 2500 W AC power supply.
Figure 25 on page 48 shows the LEDs on a 5000 W AC power supply.
5000 W AC Power Supply
Ports
Power Enabled
Supplies for for PoE+
N+N (802.3
Redundancy at)
2 0
4 258
Not supported 384
4 0
4 91
Not supported 384
Chapter 2: Component Descriptions
Minimum
Number
of Power Power Supplies
Supplies for N+N
(N) Redundancy
1 2
2 4
3 Not supported
1 2
2 4
Not Not supported
supported
47