Installing The Switch; Installing And Connecting An Ex6210 Switch - Juniper EX6210 Complete Hardware Manual

CHAPTER 8

Installing the Switch

Installing and Connecting an EX6210 Switch

Copyright © 2014, Juniper Networks, Inc.
Installing and Connecting an EX6210 Switch on page 127
Unpacking an EX6200 Switch on page 128
Parts Inventory (Packing List) for an EX6210 Switch on page 130
Installing Adjustable Mounting Brackets in a Rack or Cabinet for an EX6200
Switch on page 133
Installing the Power Cord Tray in a Rack or Cabinet for an EX6200 Switch on page 136
Mounting an EX6210 Switch on a Rack or Cabinet on page 138
Mounting an EX6210 Switch on a Rack or Cabinet Using a Mechanical Lift on page 141
Mounting an EX6210 Switch on a Rack or Cabinet Without Using a Mechanical
Lift on page 143
The EX6210 switch chassis is a rigid sheet-metal structure that houses the other hardware
components such as Switch Fabric and Routing Engine (SRE) modules, AC or DC power
supplies, a fan tray, and line cards. The switch ships in a cardboard box that has a
two-layer wooden pallet base. The switch chassis is bolted to the pallet base.
To unpack an EX6210 switch, follow instructions in
page 128.
You can install an EX6210 switch in a 19-in. rack or cabinet by using the front-mounting
bracket attached to the chassis. To install the switch in a rack or cabinet, follow the
instructions in "Mounting an EX6210 Switch on a Rack or Cabinet Using a Mechanical
Lift" on page 141 or "Mounting an EX6210 Switch on a Rack or Cabinet Without Using a
Mechanical Lift" on page 143.
To connect an EX6210 switch to earth ground, follow instructions in
Ground to an EX Series Switch" on page
To connect power to the switch chassis, follow instructions in
an EX6200 Switch" on page 177
page 180.
To connect and configure the switch, follow instructions in
an EX Series Switch (CLI Procedure)" on page
"Unpacking an EX6200 Switch" on
171.
or "Connecting DC Power to an EX6200 Switch" on
192.
"Connecting Earth
"Connecting AC Power to
"Connecting and Configuring
127