Table 40: Sfp+ Direct Attach Cable Specifications - Juniper EX6210 Complete Hardware Manual

Table 40: SFP+ Direct Attach Cable Specifications

Model Number
EX-SFP-10GE-DAC-1M
Copyright © 2014, Juniper Networks, Inc.
Table 40 on page 81 describes the cable specifications.
Specification
Rate
Connector type
Supply voltage
Power consumption (per end)
Storage temperature
Cable type
Wire AWG
Minimum cable bend radius
Cable characteristic impedance
Crosstalk between pairs
Time delay
Length
Chapter 3: Component Specifications
Value
10-Gbps full-duplex serial transmission
SFP+ passive Twinax cable assembly
3.3 V
0.57 W
° °
–40 C through 85 C
Twinax
30 AWG
1 in. (2.54 cm)
100 ohms
2% maximum
1.31 nsec/ft
3.3 ft (1 m)
81