Complete Hardware Guide for EX6210 Ethernet Switches
Related
Documentation
Mounting an EX6210 Switch on a Rack or Cabinet
138
Figure 40: Power Cord Tray Installed in a Two-Post Rack
(Optional)
Power
cord tray
Mounting an EX6210 Switch on a Rack or Cabinet on page 138
The EX6210 switch ships installed with front-mounting brackets on the chassis for
mounting the switch on a 19-in. rack or cabinet. You can purchase the optional adjustable
mounting brackets to support the switch in a four-post rack and the optional power cord
tray to manage the power supply cords.
In the rack, the switch consumes 14 U without the optional power cord tray and 15 U with
the optional power cord tray. You can mount up to three switches on a 42 U rack or on
a 45 U rack provided that the racks meet the strength requirements to support the
combined weight of the switches.
NOTE:
If you are mounting multiple switches on a rack or cabinet, mount a
switch on the bottom of the rack or cabinet first and then mount the rest of
the switches from bottom to top.
Two-post rack
Front-mounting
bracket
Copyright © 2014, Juniper Networks, Inc.