Related
Documentation
Copyright © 2014, Juniper Networks, Inc.
To pack a line card:
Place the line card in the antistatic bag.
1.
Place the line card in the shipping carton.
2.
Place the packing foam on top of and around the line card.
3.
Close the top of the cardboard shipping box and seal it with packing tape.
4.
Write the RMA number on the exterior of the box to ensure proper tracking.
5.
Returning an EX6200 Switch or Component for Repair or Replacement on page 241
Removing a Line Card from an EX6200 Switch on page 219
Chapter 15: Returning the Switch or Switch Components
255