Chassis Physical Specifications Of An Ex6210 Switch; Table 6: Physical Specifications Of The Ex6210 Switch Chassis - Juniper EX6210 Complete Hardware Manual

Related
Documentation

Chassis Physical Specifications of an EX6210 Switch

Table 6: Physical Specifications of the EX6210 Switch Chassis

Description
Chassis height
Chassis width
Chassis depth
Weight
Copyright © 2014, Juniper Networks, Inc.
NOTE: If you want to purchase additional components such as an SRE
module, line cards, power supplies (AC or DC), cover panels, power cords
(AC), or a power supply blank shelf for your switch, you must order them
separately.
NOTE: If you are upgrading your EX6200 switch from 2500 W AC power
supplies to the 5000 W AC power supplies, you must order the 5000 W AC
power supply cover panels separately.
Chassis Physical Specifications of an EX6210 Switch on page 9
Field-Replaceable Units in an EX6210 Switch on page 25
The EX6210 switch chassis is a rigid sheet-metal structure that houses the other switch
components. Table 6 on page 9
switch chassis. See Figure 3 on page
Value
24.3 in. (61.1 cm)
17.3 in. (43.9 cm)
The outer edges of the front-mounting brackets extend the width to 19 in. (48.3 cm).
15.5 in. (39.3 cm)
Chassis with backplane: 125 lb (57 kg)
Standard shipping configuration: 159 lb (72 kg)
Fully loaded chassis: 215 lb (98 kg)
See "EX6210 Switch Configurations" on page
NOTE: The fully loaded chassis weight includes the heaviest line cards in all eight
slots, two Switch fabric and Routing Engine (SRE) modules, one fan tray, and four DC
power supplies. If your switch configuration has lighter line cards or different power
supplies, the fully loaded chassis weight will be in the range 213–215 lb (97–98 kg).
summarizes the physical specifications of the EX6210
10.
7.
Chapter 1: EX6210 Switch Overview
9