Switch; Table 56: Parts List For Different Ex6210 Switch Configurations - Juniper EX6210 Complete Hardware Manual

Table 56: Parts List for Different EX6210 Switch Configurations

Component
Chassis, including the backplane and
front-mounting brackets
Switch Fabric and Routing Engine (SRE)
module
Line cards
Power supplies
Power supply cords
Fan tray
Cover panels for slots without installed
components
Copyright © 2014, Juniper Networks, Inc.
If any part on the packing list is missing, contact your customer service representative or
contact Juniper customer care from within the U.S. or Canada by telephone at
1–800–638–8296. For international-dial or direct-dial options in countries without
toll-free numbers, see
http://www.juniper.net/support/requesting-support.html
NOTE: Additional line cards and power supplies ordered are shipped
separately.
Table 56 on page 131 lists the parts and their quantities in the packing list for the shipping
configurations of the EX6210 switch.
Shipping Configuration Quantity
1
1
One of the following:
Two 48-port RJ-45 line cards
Two 48-port PoE+ line cards
One of the following:
One 2500 W AC power supply
One 5000 W AC power supply
One 2100 W DC power supply
For AC systems only:
1 per 2500 W AC power supply or 2 per 5000 W AC power supply
1
Line card cover panels: 6
SRE module cover panel: 1
NOTE: The SRE module cover panel consists of 1 line card cover panel and 1
SRE module filler panel.
One of the following:
Three 2500 W AC power supply cover panels
Three 5000 W AC power supply cover panels
Three 2100 W DC power supply cover panels
Chapter 8: Installing the Switch
.
131