Line Card Components; 48-Port Sfp Line Card In An Ex6200 Switch; Figure 14: 48-Port Sfp Line Card; Table 19: 48-Port Poe+ Line Card Models - Juniper EX6210 Complete Hardware Manual

Line Card Components

Related
Documentation

48-Port SFP Line Card in an EX6200 Switch

Copyright © 2014, Juniper Networks, Inc.

Table 19: 48-port PoE+ Line Card Models

Model Description
EX6200-48P 48-port PoE+ line card
The 48-port PoE+ line card (see
Forty-eight 10/100/1000 Gigabit Ethernet RJ-45 ports. All 48 ports on this line card
support PoE (IEEE 802.3af) and PoE+ (IEEE 802.3 at).
Line Card LEDs—Three status LEDs labeled
indicate the online and status information for the line card. See
EX6200 Switch" on page
Network port LEDs—Two LEDs per network port that indicate the link/activity and
status of each port. See
Installing a Line Card in an EX6200 Switch on page 160
Handling and Storing Line Cards in EX6200 and EX8200 Switches on page 231
The line cards in EX6200 switches combine a Packet Forwarding Engine and Ethernet
interfaces on a single assembly. They are field-replaceable units (FRUs) that can be
installed in the line card slots on the front of the switch chassis. See
an EX6210 Switch" on page
You can remove and replace them without powering off the switch or disrupting switch
functions. See Figure 14 on page

Figure 14: 48-Port SFP Line Card

1 2
5
1— Ejector lever
2— Captive screw
3—SFP ports
This topic describes:
Line Card Models on page 34
Line Card Components on page 34
Figure 13 on page 32) has:
,
ON ST
34.
"Network Port LEDs in an EX6200 Switch" on page 36
12. The line cards are hot-insertable and hot-removable:
33.
3
4
4— Line card LEDs
5— Line card label (EX6200-48F)
Chapter 2: Component Descriptions
Junos OS Release Required
11.3R2
, and on the faceplate that
PoE
"Line Card LEDs in an
"Slot Numbering for
33