Juniper EX6210 Complete Hardware Manual page 144

Complete Hardware Guide for EX6210 Ethernet Switches
Related
Documentation
124
13 dBm – 0.5 dBm – 2.5 dBm – 1 dBm – 2 dBm – 1 dBm = P
P = 6 dBm
M
The calculated power margin is greater than zero, indicating that the link has sufficient
power for transmission. Also, the power margin value does not exceed the maximum
receiver input power. Refer to the specification for your receiver to find the maximum
receiver input power.
Calculating the EX Series Switch Fiber-Optic Cable Power Budget on page 122
Understanding EX Series Switches Fiber-Optic Cable Signal Loss, Attenuation, and
Dispersion on page 104
Pluggable Transceivers Supported on EX Series Switches
M
Copyright © 2014, Juniper Networks, Inc.