Figure 24: 2500 W Ac Power Supply Leds; Figure 25: 5000 W Ac Power Supply Leds; Table 29: Power Supply Leds - Juniper EX6210 Complete Hardware Manual

Complete Hardware Guide for EX6210 Ethernet Switches

Table 29: Power Supply LEDs

LED
INPUT OK
NOTE: The 5000 W AC power supply
has two input LEDs labeled INPUT 1
.
INPUT 2
48

Figure 24: 2500 W AC Power Supply LEDs

AC appliance inlet
Captive screws
100 -12 0V/ 200
-24 0V~ 15A
47- 63H z
STA ND BY
ON
INP UT
OUT PUT
OK FAIL
OK
Handle
Enable switch
Input Fail
OK LED LED
Output
OK LED

Figure 25: 5000 W AC Power Supply LEDs

Input 2
Output
Input 1
OK LED
OK LED
OK LED
Fail
LED
Table 29 on page 48 describes the LEDs on an AC power supply in an EX6200 switch.
State
Unlit
and
Green
Description
Indicates one of the following:
Power supply is disconnected from AC power feed.
No AC power input.
Steadily lit—AC power input voltage is in the normal
operating range.
Blinking—AC power input voltage is not in the normal
operating range.
Copyright © 2014, Juniper Networks, Inc.