Install The Router Without A Mechanical Lift - Juniper M320 Quick Start Manual

Install the Router Without a Mechanical Lift

Copyright © 2016, Juniper Networks, Inc.
Four-post rack or cabinet: Install a mounting screw and a cage nut into each of the
holes aligned with the threaded holes in the spacer bars.
Open-frame rack: Install a mounting screw into each of the open mounting holes
aligned with the rack, starting from the bottom.
Reinstall the power supplies. See the M320 Multiservice Edge Router Hardware Guide
8.
Figure 4: Load the Router onto the Lift
To install the router without a mechanical lift, perform all of the following procedures:
Remove Components on page 14
Lift the Router into the Rack on page 15
Reinstall Components on page 17
Install the Router Without a Mechanical Lift
13