Chapter 9 Installing The M40E Router Without A Mechanical Lift; Tools And Parts Required To Install The M40E Router Without A Lift; Without A Lift - Juniper M40E Hardware Manual

CHAPTER 9
Installing the M40e Router Without a
Mechanical Lift

Tools and Parts Required to Install the M40e Router Without a Lift

Related
Documentation
Removing Components from the Chassis Before Installing the M40e Router Without
a Lift
Copyright © 2010, Juniper Networks, Inc.
All manuals and user guides at all-guides.com
Tools and Parts Required to Install the M40e Router Without a Lift on page 83
Removing Components from the Chassis Before Installing the M40e Router Without
a Lift on page 83
Installing the M40e Chassis into the Rack on page 95
Reinstalling the M40e Components into the Chassis on page 97
To install the chassis without using a mechanical lift, you need:
Phillips (+) screwdrivers, numbers 1 and 2
Flat-blade screwdriver, approximately 1/4 in. (6 mm), for removing craft interface
5/32-in. Allen (hexagonal) wrench for tightening the mounting screws provided in the
accessory box; do not substitute a metric-size wrench
Electrostatic bags or antistatic mats, one for each electronic component removed
Electrostatic discharge (ESD) grounding wrist strap
M40e Chassis Description on page 8
M40e Chassis Lifting Guidelines on page 235
M40e Site Preparation Checklist on page 67
Installing the M40e Chassis into the Rack on page 95
Removing Components from the Chassis Before Installing the M40e Router Without
a Lift on page 83
You can install the router into a rack either with or without the help of a mechanical lift.
Because the router weighs between 190 lb (86 kg) and about 360 lb (164 kg) depending
83