Configure Ospf Ase-Limit - Extreme Networks ExtremeWare Command Reference Manual

IGP Commands

configure ospf ase-limit

configure ospf ase-limit <number> {timeout <seconds>}
Description
Configures the AS-external LSA limit and overflow duration associated with OSPF database overflow
handling.
Syntax Description
number
seconds
Default
The default for timeout is 0, which indicates that once the router goes into overflow state, it stays there
until OSPF is disabled and then re-enabled.
Usage Guidelines
None.
Example
The following command configures the AS-external LSA limit and overflow duration:
configure ospf ase-limit 50000 timeout 1800
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
1300
Specifies the number of external routes that can be held on a link-state
database.
Specifies a duration for which the system has to remain in the overflow state.
ExtremeWare Software 7.3.0 Command Reference Guide