Configure Rip Vlan Cost - Extreme Networks ExtremeWare Command Reference Manual

configure rip vlan cost

configure rip vlan [<vlan name> | all] cost <cost>
Description
Configures the cost (metric) of the interface.
Syntax Description
vlan name
all
cost
Default
The default setting is 1.
Usage Guidelines
None.
Example
The following command configures the cost for the VLAN finance to a metric of 3:
configure rip vlan finance cost 3
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.1e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.7 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
Specifies a cost metric.
configure rip vlan cost
1841