Configure Bgp Neighbor Next-Hop-Self - Extreme Networks ExtremeWare Command Reference Manual

BGP Commands

configure bgp neighbor next-hop-self

configure bgp neighbor [<ip address> | all] [next-hop-self |
no-next-hop-self]
Description
Configures the next hop address used in the outgoing updates to be the address of the BGP connection
originating the update.
Syntax Description
ip address
all
next-hop-self
no-next-hop-self
Default
N/A.
Usage Guidelines
These settings apply to the peer group and all neighbors of the peer group.
Example
The following command configures the next hop address used in the updates to be the address of the
BGP connection originating it:
configure bgp neighbor 172.16.5.25 next-hop-self
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
1414
Specifies an IP address.
Specifies all neighbors.
Specifies that the next hop address used in the updates be the address of the
BGP connection originating it.
Specifies that the next hop address used in the updates not be the address of
the BGP connection originating it (lets BGP decide what would be the next
hop).
ExtremeWare Software 7.3.0 Command Reference Guide