Config Arp_Aging Time - Extreme Networks EAS 200-24p Switch CLI Manual

config arp_aging time

Description
This command sets the maximum amount of time, in minutes, that a dynamic ARP entry can remain in
the switch's ARP table, without being accessed, before it is dropped from the table.
Format
config arp_aging time <minutes 0-65535>
Parameters
time - The ARP age-out time, in minutes, the default is 20.
●
<minutes 0-65535> - Enter the ARP age-out time here. This value must be between 0 and 65535
●
minutes.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure ARP aging time to 30 minutes:
EAS 200-24p:admin# config arp_aging time 30
Command: config arp_aging time 30
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config arp_aging time
201