Create Vlan Vlanid - Extreme Networks EAS 200-24p Switch CLI Manual

create vlan vlanid

Description
This command allows the user to create more than one VLANs at a time. A unique VLAN name (e.g.
VLAN10) will be automatically assigned by the system. The automatic assignment of VLAN name is
based on the following rule: "VLAN"+ID. For example, for VLAN ID 100, the VLAN name will be
VLAN100. If this VLAN name is conflict with the name of an existing VLAN, then it will be renamed
based on the following rule: "VLAN"+ID+"ALT"+ collision count. For example, if this conflict is the
second collision, then the name will be VLAN100ALT2.
Format
create vlan vlanid <vidlist> {type [1q_vlan | private_vlan]} {advertisement}
Parameters
vlanid - The VLAN ID list to be created.
●
<vidlist> - Enter the VLAN ID list here.
●
type - (Optional) Specifies the type of VLAN to be created.
●
1q_vlan - (Optional) Specifies that the VLAN created will be a 1Q VLAN.
●
private_vlan – (Optional) Specifies that the private VLAN type will be used.
●
advertisement - (Optional) Specifies the VLAN as being able to be advertised out.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create some VLANs using VLAN ID:
EAS 200-24p:admin# create vlan vlanid 10-30
Command: create vlan vlanid 10-30
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
create vlan vlanid
51