Enable Snmp Traps - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 54: Simple Network Management Protocol (SNMP) Command List

enable snmp traps

Description
This command is used to enable SNMP trap support.
Format
enable snmp traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP trap support:
EAS 200-24p:admin# enable snmp traps
Command: enable snmp traps
Success.
EAS 200-24p:admin#
764
Extreme Networks EAS 200-24p Switch CLI Manual