Debug Stp Show Counter - Extreme Networks EAS 200-24p Switch CLI Manual

debug stp show counter

Description
This command used to display the STP counters.
Format
debug stp show counter {ports [<portlist> | all]}
Parameters
ports - (Optional) Specifies the STP ports for display.
●
<portlist> - Enter the list of port used for this configuration here.
●
all - Display all port's counters.
●
If no parameter is specified, display the global counters.
Restrictions
Only Administrator-level users can issue this command.
Extreme Networks EAS 200-24p Switch CLI Manual
debug stp show counter
539