Show Snmp Host - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 54: Simple Network Management Protocol (SNMP) Command List

show snmp host

Description
This command is used to display the recipient for which the traps are targeted.
Format
show snmp host {<ipaddr>}
Parameters
host - (Optional) The IP address of the recipient for which the traps are targeted.
●
<ipaddr> - Enter the IP address used for the configuration here.
●
If no parameter specified, all SNMP hosts will be displayed.
Restrictions
None.
Example
To show SNMP host:
EAS 200-24p:admin#
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version
--------------- ---------------
10.90.90.3 V3 noauthnopriv
10.90.90.2 V2c
10.90.90.1 V1
10.90.90.4 V3 authnopriv
10.90.90.5 V3 authpriv
Total Entries : 5
EAS 200-24p:admin#
754
show snmp host
Community Name / SNMPv3 User Name
---------------------------------
initial
private
public
user123
user234
Extreme Networks EAS 200-24p Switch CLI Manual