Config Temperature - Extreme Networks EAS 200-24p Switch CLI Manual

config temperature

Description
This command is used to configure the log state for temperature warning event.
Format
config temperature [log] state [enable | disable]
Parameters
log - Specifies the log state for the warning temperature event.
●
state - Specifies the log state for the warning temperature event.
●
enable - Enable log state for warning temperature event. The default state is enabled.
●
disable - Disable log state for warning temperature event.
●
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the warning temperature threshold:
EAS 200-24p:admin#config temperature log state enable
Command: config temperature log state enable
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config temperature
603