Config Vlan Vlanid - Extreme Networks EAS 200-24p Switch CLI Manual

config vlan vlanid

Description
This command allows you to configure multiple VLANs at one time. But conflicts will be generated if
you configure the name of multiple VLANs at one time.
Format
config vlan vlanid <vidlist> {[add [tagged | untagged | forbidden] | delete]
<portlist> | advertisement [enable | disable] | name <vlan_name 32>}(1)
Parameters
vlanid - The VID list of VLANs to configure.
●
<vidlist> - Enter the VLAN ID list here.
●
add - (Optional) Specifies to add tagged, untagged or forbidden ports to the VLAN.
●
tagged - Specifies the additional ports as tagged.
●
untagged - Specifies the additional ports as untagged.
●
forbidden - Specifies the additional ports as forbidden.
●
delete - (Optional) Specifies to delete ports from the VLAN.
●
<portlist> - (Optional) Enter the list of ports used for the configuration here.
●
advertisement - (Optional) Specifies the GVRP state of this VLAN.
●
enable - Specifies to enable advertisement for this VLAN.
●
disable - Specifies to disable advertisement for this VLAN.
●
name - (Optional) The new name of the VLAN.
●
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add 4 through 8 as tagged ports to the VLAN ID from 10-20:
EAS 200-24p:admin# config vlan vlanid 10-20 add tagged 4-8
Command: config vlan vlanid 10-20 add tagged 4-8
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config vlan vlanid
55