Create Mac_Based_Access_Control - Extreme Networks EAS 200-24p Switch CLI Manual

create mac_based_access_control

Description
This command is used to assign a static 802.1Q VLAN as a MAC-based Access Control guest VLAN.
Format
create mac_based_access_control [guest_vlan <vlan_name 32> | guest_vlanid
<vlanid 1-4094>]
Parameters
guest_vlan - Specify MAC-based Access Control guest VLAN by name, it must be a static 1Q VLAN.
●
<vlan_name 32> - Enter the VLAN name here. This name can be up to 32 characters long.
●
guest_vlanid - Specify MAC-based Access Control guest VLAN by VID, it must be a static 1Q
●
VLAN.
<vlanid 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a MAC-based Access Control guest VLAN:
EAS 200-24p:admin# create mac_based_access_control guest_vlan VLAN8
Command: create mac_based_access_control guest_vlan VLAN8
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
create mac_based_access_control
511