Config Mac_Based_Access_Control Guest_Vlan - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 32: MAC-based Access Control Command List

config mac_based_access_control guest_vlan

Description
This command will assign a specified port list to the MAC-based Access Control guest VLAN. Ports
that are not contained in port list will be removed from the MAC-based Access Control guest VLAN.
For detailed information on the operation of MAC-based Access Control guest VLANs, please see the
description for the "config mac_based_access_control ports" command.
Format
config mac_based_access_control guest_vlan ports <portlist>
Parameters
ports - Specify MAC-based Access Control guest VLAN membership.
●
<portlist> - Enter the list of port used for this configuration here.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the MAC-based Access Control guest VLAN membership:
EAS 200-24p:admin# config mac_based_access_control guest_vlan ports 1-8
Command: config mac_based_access_control guest_vlan ports 1-8
Success.
EAS 200-24p:admin#
508
Extreme Networks EAS 200-24p Switch CLI Manual