Chapter 15: Compound Authentication Command List
show authentication ports
Description
This command is used to display the authorization mode on ports.
Format
show authentication ports {<portlist>}
Parameters
<portlist> - (Optional) Specify to display compound authentication on specific port(s).
●
Restrictions
None.
Example
To display the authentication settings for ports 1 to 3:
EAS 200-24p:admin#show authentication ports 1-3
Command: show authentication ports 1-3
Port
Auth Mode
---- -----------
1
Host-based
2
Host-based
3
Host-based
EAS 200-24p:admin#
262
Extreme Networks EAS 200-24p Switch CLI Manual