Config Time_Zone - Extreme Networks EAS 200-24p Switch CLI Manual

config time_zone

Description
Configure time zone of the device.
Format
config time_zone {operator [+ | -] | hour <gmt_hour 0-13> | min <minute 0-59>}
Parameters
operator - (Optional) Specifies the operator of time zone.
●
[+ | -] - Specifies that time should be added or subtracted to or from the GMT.
●
hour - (Optional) Specifies the hour of time zone.
●
<gmt_hour 0-13> - Enter the hour value of the time zone here. This value must be between 0 and
●
13.
min - (Optional) Specifies the minute of time zone.
●
<minute 0-59> - Enter the minute value of the time zone here. This value must be between 0 and
●
59.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure time_zone:
EAS 200-24p:admin# config time_zone operator + hour 2 min 30
Command: config time_zone operator + hour 2 min 30
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config time_zone
821