Cfm Linktrace - Extreme Networks EAS 200-24p Switch CLI Manual

cfm linktrace

Description
This command is used to issue a CFM link track message.
Format
cfm linktrace <macaddr> [mepname <string 32> | mepid <int 1-8191> md [<string
22> | md_index <uint 1-4294967295>] ma [<string 22> | ma_index <uint 1-
4294967295>]] {ttl <int 2-255> | pdu_priority <int 0-7>}
Parameters
<macaddr> - Specifies the destination MAC address.
●
mepname – (Optional) Specifies the MEP name used.
●
<string 32> - Enter the MEP name used here. This name can be up to 32 characters long.
●
mepid – (Optional) Specifies the MEP ID used.
●
<int 1-8191> - Enter the MEP ID used here. This value must be between 1 and 8191.
●
md – (Optional) Specifies the maintenance domain name.
●
<string 22> - Enter the maintenance domain name her. This name can be up to 22 characters long.
●
md_index – (Optional) Specifies the maintenance domain index.
●
<uint 1-4294967295> - Enter the maintenance domain index value here. This value can be
●
between 1 and 4294967295.
ma – (Optional) Specifies the maintenance association name.
●
<string 22> - Enter the maintenance association name her. This name can be up to 22 characters
●
long.
ma_index – (Optional) Specifies the maintenance association index.
●
<uint 1-4294967295> - Enter the maintenance association index value here. This value can be
●
between 1 and 4294967295.
ttl - (Optional) Specifies the link trace message TTL value. The default value is 64.
●
<int 2-255> - Enter the link trace message TTL value here. This value must be between 2 and 255.
●
pdu_priority - (Optional) The 802.1p priority to be set in the transmitted LTM. If not specified, it
●
uses the same priority as CCMs sent by the MA.
<int 0-7> - Enter the PDU priority value here. This value must be between 0 and 7.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Extreme Networks EAS 200-24p Switch CLI Manual
cfm linktrace
295