Extreme Networks EAS 200-24p Switch CLI Manual page 21

EAS 200-24p:admin# config ipif System ipaddress 10.24.22.100/255.0.0.0
Command: config ipif System ipaddress 10.24.22.100/8
Success.
EAS 200-24p:admin#
In the above example, the switch was assigned an IP address of 10.24.22.100 with a subnet mask of
255.0.0.0. The system message Success indicates that the command was executed successfully. The
switch can now be configured and managed via Telnet, SNMP MIB browser and the CLI or via the web-
based management agent using the above IP address to connect to the switch.
There are a number of helpful features included in the CLI. Entering the? command will display a list of
all of the top-level commands.
EAS 200-24p:admin#?
Command: ?
..
?
cable_diag ports
cd
cfm linktrace
cfm lock md
cfm loopback
change drive
clear
clear arptable
clear attack_log
clear cfm pkt_cnt
clear counters
clear ethernet_oam ports
clear fdb
clear igmp_snooping data_driven_group
clear igmp_snooping statistics counter
clear log
clear mac_based_access_control auth_state
clear mld_snooping data_driven_group
clear mld_snooping statistics counter
clear port_security_entry
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
When entering a command without its required parameters, the CLI will prompt you with a Next
possible completions: message.
EAS 200-24p:admin# config account
Command: config account
Next possible completions:
<username>
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
Setting the Switch's IP Address
21