Table of Contents
Advertisement
Chapter 11: Basic Commands Command List
show switch
Description
The show switch command displays the switch information.
Format
show switch
Parameters
None.
Restrictions
None.
Example
The following is an example for display of switch information.
EAS 200-24p:admin# show switch
Command: show switch
Device Type
MAC Address
IP Address
VLAN Name
Subnet Mask
Default Gateway
Boot PROM Version
Firmware Version
Hardware Version
System Name
System Location
System Uptime
System Contact
Spanning Tree
GVRP
IGMP Snooping
MLD Snooping
VLAN Trunk
Telnet
Web
SNMP
SSL Status
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
220
: EAS 200-24p Gigabit Ethernet Switch
: 00-04-96-53-F6-1F
: 0.0.0.0 (Manual)
: default
: 0.0.0.0
: 0.0.0.0
: 1.00.001
: 1.00.007
: A1
:
:
: 0 days, 1 hours, 8 minutes, 55 seconds
:
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled (TCP 23)
: Enabled (TCP 80)
: Disabled
: Disabled
Extreme Networks EAS 200-24p Switch CLI Manual
Hide quick links:
Advertisement
Table of Contents
