Chapter 25: IGMP / MLD Snooping Command List
show igmp_snooping group
Description
This command displays the current IGMP snooping group configuration on the switch.
Format
show igmp_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>] {<ipaddr>}} {data_driven}
Parameters
vlan - (Optional) Specify the name of the VLAN for which you want to view IGMP snooping group
●
information. If VLAN, ports and IP address are not specified, the system will display all current
IGMP snooping group information.
<vlan_name 32> - Enter the VLAN name here. The VLAN name can be up to 32 characters long.
●
vlanid - (Optional) Specify the ID of the VLAN for which you want to view IGMP snooping group
●
information.
<vlanid_list> - Enter the VLAN ID list here.
●
ports - (Optional) Specify a list of ports for which you want to view IGMP snooping group
●
information.
<portlist> - Enter the list of ports here.
●
<ipaddr> - (Optional) Specify the group IP address for which you want to view IGMP snooping
●
group information.
data_driven - (Optional) If data_driven is specified, only data driven groups will be displayed.
●
Restrictions
None.
404
Extreme Networks EAS 200-24p Switch CLI Manual