show mld_snooping rate_limit
Description
The command configures the rate limit of MLD control packets that are allowed by each port.
Format
show mld_snooping rate_limit [ports <portlist> | vlanid <vlanid_list>]
Parameters
ports - Specify a list of ports.
●
<portlist> - Enter the range of ports to be configured here.
●
vlanid - Specify a list of VLANs.
●
<vlanid_list> - Enter the VLAN ID list here.
●
Restrictions
None.
Example
To configure the mld_snooping per port rate_limit:
EAS 200-24p:admin#
Command: show mld_snooping rate_limit ports 1-15
Port
Rate Limit
--------
-----------
1
No Limit
2
100
3
No Limit
4
No Limit
5
No Limit
Total Entries: 5
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
show mld_snooping rate_limit ports 1-15
show mld_snooping rate_limit
441