Clear Counters - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 39: Network Monitoring Command List

clear counters

Description
The clear counters command clears the switch's statistics counters.
Format
clear counters {ports <portlist>}
Parameters
ports - (Optional) Specifies a range of ports to be configured. The port list is specified by listing the
●
lowest switch number and the beginning port number on that switch, separated by a colon. Then
highest switch number, and the highest port number of the range (also separated by a colon) are
specified. The beginning and end of the port list range are separated by a dash.
<portlist> - Enter a list of ports used for the configuration here.
●
If no parameter is specified, system will display counters of all the ports.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To clear the switch's statistics counters:
EAS 200-24p:admin# clear counters ports 7-9
Command: clear counters ports 7-9
Success.
EAS 200-24p:admin#
588
Extreme Networks EAS 200-24p Switch CLI Manual