config 802.1x capability
Description
Use to configure the port capability.
Format
config 802.1x capability ports [<portlist> | all] [authenticator | none]
Parameters
ports - Specifies a range of ports to be configured.
●
<portlist> - Enter the list of ports used for the configuration here.
●
all - Specifies all ports to be configured.
●
authenticator - The port that wishes to enforce authentication before allowing access to services that
●
are accessible via that port adopts the authenticator role.
none - Disable authentication on the specified ports.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the port capability:
EAS 200-24p:admin# config 802.1x capability ports 1-10 authenticator
Command: config 802.1x capability ports 1-10 authenticator
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config 802.1x capability
85