config limited_multicast_addr
Description
Used to configure the multicast address filtering function on a port or VLAN. When there are no
profiles specified with a port or VLAN, the limited function is not effective. When the function is
configured on a port, it limits the multicast group operated by the IGMP or MLD snooping function.
When this function is configured on a VLAN, the multicast group is limited to only operate the IGMP
or MLD layer 3 functions. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
Format
config limited_multicast_addr [ports <portlist> | vlanid <vlanid_list>] {[ipv4
| ipv6]} {[add | delete] [profile_id <value 1-24> | profile_name <name 1-32>]
| access [permit | deny]}(1)
Parameters
ports - Specifies the range of ports to configure the multicast address filtering function.
●
<portslist> - Enter the list of port to be configured here.
●
vlanid - Specifies the VLAN ID of the VLAN that the multicast address filtering function will be
●
configured on.
<vlanid_list> - Enter the VLAN ID list here.
●
ipv4 - (Optional) Specifies the IPv4 multicast profile.
●
ipv6 - (Optional) Specifies the IPv6 multicast profile.
●
add - (Optional) Adds a multicast address profile to a port.
●
delete - (Optional) Deletes a multicast address profile to a port.
●
profile_id - (Optional) A profile to be added to or deleted from the port
●
<value 1-24> - Enter the profile ID value here. This value must be between 1 and 24.
●
profile_name - (Optional) Specifies the profile name used.
●
<name 1-32> - Enter the profile name here. The profile name can be up to 32 characters long.
●
access - (Optional) Specifies the access of packets matching the addresses defined in the profiles.
●
permit - Specifies that packets matching the addresses defined in the profiles will be permitted.
●
The default mode is permit.
deny - Specifies that packets matching the addresses defined in the profiles will be denied.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Extreme Networks EAS 200-24p Switch CLI Manual
config limited_multicast_addr
549