Extreme Networks EAS 200-24p Switch CLI Manual page 482

Chapter 30: Link Layer Discovery Protocol (LLDP) Command List
Example
To display outbound LLDP advertisements for port 1 in detailed mode. Port description on the display
should use the same value as ifDescr.
EAS 200-24p:admin#show lldp local_ports 1 mode detailed
Command: show lldp local_ports 1 mode detailed
Port ID : 1
-----------------------------------------------------------------------------
Port ID Subtype
Port ID
Port Description
Port PVID
Management Address Count
Subtype
Address
IF Type
OID
PPVID Entries Count
(None)
VLAN Name Entries Count
Entry 1 :
VLAN ID
VLAN Name
482
: Local
: 1/1
: Extreme Networks EAS 200-24p
R1.00.007 Port 1
: 1
: 1
: IPv4
: 192.168.69.123
: IfIndex
: 1.3.6.1.4.1.1916.2.183
: 0
: 1
: 1
: default
Extreme Networks EAS 200-24p Switch CLI Manual