restricted_tcn - (Optional) To decide if this port not to propagate topology change. The default value
●
is false.
true - Specifies that the port can be set to propagate a topology change.
●
false - Specifies that the port can not be set to propagate a topology change.
●
fbpdu - (Optional) To decide if this port will flood STP BPDU when STP functionality is disabled.
●
When the state is set to enable, the received BPDU will be forwarded. When the state is set to
disable, the received BPDU will be dropped.
enable - Specifies that the port can be set to flood the STP BPDU when the STP functionality is
●
disabled.
disable - Specifies that the port can not be set to flood the STP BPDU when the STP functionality
●
is disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure STP ports:
EAS 200-24p:admin#
Command: config stp ports 1 externalCost auto
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config stp ports 1 externalCost auto
config stp ports
573