config stp priority
Description
This command is used to configure the instance priority.
Format
config stp priority <value 0-61440> instance_id <value 0-15>
Parameters
priority - Specifies the bridge priority value. This value must be divisible by 4096.
●
<value 0-61440> - Enter the bridge priority value here. This value must be between 0 and 61440.
●
instance_id - Identifier to distinguish different STP instances.
●
<value 0-15> - Enter the STP instance ID here. This value must be between 0 and 15.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the STP instance ID:
EAS 200-24p:admin#
Command: config stp priority 61440 instance_id 0
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config stp priority 61440 instance_id 0
config stp priority
569