Config Stp Instance_Id - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 37: Multiple Spanning Tree Protocol (MSTP) Command List

config stp instance_id

Description
This command is used to map or remove the VLAN range of the specified MST instance for the existed
MST instances.
Format
config stp instance_id <value 1-15> [add_vlan | remove_vlan] <vidlist>
Parameters
instance_id - Specifies the MSTP instance ID. Instance 0 represents for default instance, CIST.
●
<value 1-15> - Enter the MSTP instance ID here. This value must be between 1 and 15.
●
add_vlan - Specifies to map the specified VLAN list to an existing MST instance.
●
remove_vlan - Specifies to delete the specified VLAN list from an existing MST instance.
●
<vidlist> - Specifies a list of VLANs by VLAN ID.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To map a VLAN ID to an MSTP instance:
EAS 200-24p:admin#
Command: config stp instance_id 2 add_vlan 1-3
Success.
EAS 200-24p:admin#
To remove a VLAN ID from an MSTP instance:
EAS 200-24p:admin#
Command: config stp instance_id 2 remove_vlan 2
Success.
EAS 200-24p:admin#
564
config stp instance_id 2 add_vlan 1-3
config stp instance_id 2 remove_vlan 2
Extreme Networks EAS 200-24p Switch CLI Manual