Show Egress_Flow_Meter - Extreme Networks EAS 200-24p Switch CLI Manual

show egress_flow_meter

Description
This command is used to display the egress flow-based metering configuration.
Format
show egress_flow_meter {[profile_id <value 1-4> | profile_name <name 1-32>]
{access_id <value 1-128>}}
Parameters
profile_id - (Optional) Specifies the index of access list profile.
●
<value 1-4> - Enter the profile ID used here. This value must be between 1 and 4.
●
profile_name - (Optional) Specifies the name of the profile.
●
<name 1-32> - Enter the profile name used here. This name can be up to 32 characters long.
●
access_id - (Optional) Specifies the access ID.
●
<value 1-128> - Enter the access ID used here. This value must be between 1 and 128.
●
Restrictions
None.
Extreme Networks EAS 200-24p Switch CLI Manual
show egress_flow_meter
191