Chapter 11: Basic Commands Command List
disable ipif
Description
This command is used to disable an IP interface.
Format
disable ipif [<ipif_name 12> | all]
Parameters
ipif_name - Specifies the name of the IP interface.
●
<ipif_name 12> - Enter the IP interface name used here. This name can be up to 12 characters
●
long.
all – Specifies that all the IP interfaces will be disabled.
●
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable an IP interface:
EAS 200-24p:admin#disable ipif newone
Command: disable ipif newone
Success.
EAS 200-24p:admin#
234
Extreme Networks EAS 200-24p Switch CLI Manual