Config Snmp Engineid - Extreme Networks EAS 200-24p Switch CLI Manual

config snmp engineID

Description
This command is used to configure a identifier for the SNMP engine on the switch.
Format
config snmp engineID <snmp_engineID 10-64>
Parameters
engineID - Identify for the SNMP engine on the switch. It is octet string type. It accepts the hex
●
number directly.
<snmp_engineID 10-64> - Enter the SNMP engine ID here. This value must be between 10 and
●
64.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure SNMP engine ID to "1023457890":
EAS 200-24p:admin# config snmp engineID 1023457890
Command: config snmp engineID 1023457890
Success.
EAS 200-24p:admin#
Extreme Networks EAS 200-24p Switch CLI Manual
config snmp engineID
757