Enable Vlan_Trunk - Extreme Networks EAS 200-24p Switch CLI Manual

Chapter 66: VLAN Trunking Command List

enable vlan_trunk

Description
This command is used to enable the VLAN trunk function. When the VLAN trunk function is enabled,
the VLAN trunk ports shall be able to forward all tagged frames with any VID.
Format
enable vlan_trunk
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable the VLAN Trunk:
EAS 200-24p:admin# enable vlan_trunk
Command: enable vlan_trunk
Success.
EAS 200-24p:admin#
852
Extreme Networks EAS 200-24p Switch CLI Manual